LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1004 (Tires, Wheels & Tire Pressure Monitoring System (TPMS)) >> Function Diagnosis >> Diagnosis System (BCM) >> CONSULT-III Function (BCM) >> Consult-III Diagnostic Modes

Consult-III Diagnostic Modes

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CONSULT-III can display each diagnostic item using the diagnostic test modes as shown.

DIAGNOSTIC MODE DESCRIPTION CHART

Diagnostic mode Description
Work Support Supports inspections and adjustments. Commands are transmitted to the BCM for setting the status suitable for required operation, input/output signals are received from the BCM and received data is displayed.
Data Monitor Displays BCM input/output data in real time.
Active Test Operation of electrical loads can be checked by sending drive signal to them.
Self-Diagnostic Results Displays BCM self-diagnosis results.
CAN Diag Support Monitor The result of transmit/receive diagnosis of CAN communication can be read.
ECU Identification BCM part number can be read.
Configuration Performs BCM configuration read/write functions.
scientia non olet · About LEMON Manuals