LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1004 (Tires, Wheels & Tire Pressure Monitoring System (TPMS)) >> Basic Inspection >> Inspection And Adjustment >> Preliminary Check

Preliminary Check

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. TIRE PRESSURE

    Check all tire pressures. Refer to "TIRE ".

    Is the inspection result normal? 

    YES: GO TO 2

    NO: Adjust tire pressure to specified value.

  2. LOW TIRE PRESSURE WARNING LAMP

    Check low tire pressure warning lamp activation.

    Does the low tire pressure warning lamp activate for one second when ignition switch is turned ON? 

    YES: GO TO 3

    NO: GO TO "LOW TIRE PRESSURE WARNING LAMP DOES NOT COME ON WHEN IGNITION SWITCH IS TURNED ON ".

  3. BCM CONNECTOR
    1. Disconnect BCM harness connectors.
    2. Check terminals for damage or loose connection.
    3. Reconnect harness connector.

    Is the inspection result normal? 

    YES: GO TO 4

    NO: Repair or replace damaged parts.

  4. TRANSMITTER ACTIVATION TOOL

    Check battery in transmitter activation tool.

    Is the inspection result normal? 

    YES: Perform SELF-DIAGNOSIS. Refer to "SELF-DIAGNOSIS (WITH CONSULT-III) ".

    NO: Replace battery in transmitter activation tool.

scientia non olet · About LEMON Manuals