Removal and Installation: Installation

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Install each differential side oil seal evenly using Tool so that differential side oil seal protrudes by the dimension (C) respectively.

A: Transaxle case side

B: Converter housing side

Dimension C: 0 ± 0.5 mm (0 ± 0.020 in)

Tool number: ST33400001 (J-26082)

NOTE: Differential side oil seal removal direction is used as the reference.

Fig 1: [Identifying Differential Side Oil Seal Protrudes Dimension]

Courtesy of NISSAN MOTOR CO., U.S.A.

CAUTION:

Never reuse differential side oil seals.
Apply CVT fluid to differential side oil seals.