Consult-III Setting Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Using CONSULT-III, perform a cruise test and record the result.
Print the result and ensure that shifts and lock-ups take place as per Shift Schedule.

Touch "Data Monitor" in "Direct Diagnostic Mode" screen.
Touch "MAIN SIGNALS" to set recording condition.
See "Numerical Display", "Barchart Display" or "Line Graph Display".
Touch "START".
When performing cruise test. Refer to "CRUISE TEST ".
After finishing cruise test part, touch "RECORD".
Touch "STORE".
Touch "BACK".
Touch "DISPLAY".
Touch "PRINT".
Check the monitor data printed out.