Check before Engine Is Started

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SHIFT POSITION INDICATOR
1. Park vehicle on flat surface.
2. Move selector lever to "P" position.
3. Turn ignition switch OFF. Wait at least 5 seconds.
4. Turn ignition switch ON. (Do not start engine.)
Has shift position indicator been turned ON for about 2 seconds?

YES:
1. Turn ignition switch OFF.
2. Perform self-diagnosis and note NG items. Refer to "DTC INDEX ".
3. Go to "CHECK AT IDLE ".
  NO: Stop "Road Test". Refer to "SYMPTOM TABLE ".