LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Automatic Transmission (Re0F09B)) >> Component Diagnosis >> U1000 Can Comm Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CAN COMMUNICATION CIRCUIT

    With CONSULT-III

    1. Turn ignition switch ON and start engine.
    2. Perform "Self Diagnostic Results" in "TRANSMISSION".

    Is "U1000 CAN COMM CIRCUIT" indicated? 

    YES: Go to "CAN SYSTEM SPECIFICATION CHART ".

    NO: Refer to "INTERMITTENT INCIDENT ".

scientia non olet · About LEMON Manuals