LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Automatic Transmission (Re0F09B)) >> Component Diagnosis >> U1000 Can Comm Circuit >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION LOGIC CHART

DTC Item (CONSULT-III screen term) Malfunction is detected when... Possible cause
U1000 CAN COMM CIRCUIT When TCM is not transmitting or receiving CAN communication signal for 2 seconds or more. Harness or connectors
(CAN communication line is open or shorted.)
scientia non olet · About LEMON Manuals