Component Inspection (Step Motor)

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK STEP MOTOR

Check resistance between CVT unit connector terminals.

TERMINAL RESISTANCE REFERENCE

CVT unit connector			Resistance (Approx.)
Connector	Terminals		Resistance (Approx.)
F46	6	7	30.0 Ω
F46	8	9	30.0 Ω

Fig 1: Checking Resistance Between CVT Unit Connector Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Check resistance between CVT unit connector terminals and ground.

TERMINAL RESISTANCE REFERENCE

CVT unit connector		Ground	Resistance (Approx.)
Connector	terminal
F46	6		15.0 Ω
	7
	8
	9

Is the inspection result normal?

YES: INSPECTION END

NO: Replace transaxle assembly. Refer to "EXPLODED VIEW ".

Fig 2: Checking Resistance Between CVT Unit Connector Terminals And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.