Component Inspection [Pressure Control Solenoid Valve A (Line Pressure Solenoid Valve)]

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PRESSURE CONTROL SOLENOID VALVE A (LINE PRESSURE SOLENOID VALVE)

Check resistance between CVT unit connector terminal and ground.

TERMINAL RESISTANCE REFERENCE

CVT unit connector		Ground	Resistance (Approx.)
Connector	Terminal
F15	2		3.0 - 9.0 Ω

Is the inspection result normal?

YES: INSPECTION END

NO: Replace transaxle assembly. Refer to "EXPLODED VIEW ".

Fig 1: Checking Resistance Between CVT Unit Connector Terminal 2 And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.