LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Automatic Transmission (Re0F09B)) >> Component Diagnosis >> P0744 A/T TCC S/V Function (Lock -Up) >> Component Inspection (Torque Converter Clutch Solenoid Valve)

Component Inspection (Torque Converter Clutch Solenoid Valve)

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK TORQUE CONVERTER CLUTCH SOLENOID VALVE

    Check resistance between CVT unit connector terminal and ground.

    TERMINAL RESISTANCE REFERENCE

    CVT unit connector Ground Resistance (Approx.)
    Connector Terminal
    F46 12 3.0 - 9.0 Ω

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace transaxle assembly. Refer to "EXPLODED VIEW ".

    Fig 1: Checking Resistance Between CVT Unit Connector Terminal 12 And Ground
    G05689323Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals