LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Automatic Transmission (Re0F09B)) >> Component Diagnosis >> P0744 A/T TCC S/V Function (Lock -Up) >> Component Inspection (Lock up Select Solenoid Valve)

Component Inspection (Lock up Select Solenoid Valve)

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK LOCK UP SELECT SOLENOID VALVE

    Check resistance between CVT unit connector terminal and ground.

    TERMINAL RESISTANCE REFERENCE

    CVT unit connector Ground Resistance (Approx.)
    Connector Terminal
    F46 13 6.0 - 19.0 Ω

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace transaxle assembly. Refer to "EXPLODED VIEW ".

    Fig 1: Checking Resistance Between CVT Unit Connector Terminal 13 And Ground
    G05689325Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals