LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Automatic Transmission (Re0F09B)) >> Component Diagnosis >> P0730 Belt Damage >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC

    With CONSULT-III

    1. Turn ignition switch ON.
    2. Perform "Self Diagnostic Results" in "TRANSMISSION".

    Are any DTC detected? 

    YES-1 (DTC for "P0730 BELT DAMG" is detected): Replace transaxle assembly. Refer to "EXPLODED VIEW ".

    YES-2 (DTC except for "P0730 BELT DAMG" is detected): Check DTC detected item. Refer to "CONSULT-III FUNCTION (TRANSMISSION) ".

    NO: GO TO 2.

  2. DETECT MALFUNCTIONING ITEMS

    Check TCM connector pin terminals for damage or loose connection with harness connector.

    Is the inspection result normal? 

    YES: Replace TCM. Refer to "EXPLODED VIEW ".

    NO: Repair or replace damaged parts.

scientia non olet · About LEMON Manuals