DTC Detection Logic
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION LOGIC CHART
| DTC |
Item (CONSULT-III screen term) |
Malfunction is detected when... |
Possible cause |
| P0705 |
PNP SW/CIRC |
TCM does not receive the correct voltage signal (based on the gear position) from the switch. |
- Harness or connectors (PNP switches circuit is open or shorted.)
- PNP switch
|