Component Inspection (Stop Lamp Switch)

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK STOP LAMP SWITCH

Check continuity between stop lamp switch connector terminals.

TERMINAL CONTINUITY REFERENCE

Stop lamp switch connector			Condition	Continuity
Connector	Terminal		Condition	Continuity
E38	3	4	Depressed brake pedal	Existed
E38	3	4	Released brake pedal	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace stop lamp switch. Refer to "EXPLODED VIEW ".

Fig 1: Checking Continuity Between Stop Lamp Switch Connector Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.