LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Automatic Transmission (Re0F09B)) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Precaution for TCM and CVT Assembly Replacement >> Method For Writing Data From The ROM Assembly In The Transaxle

Method For Writing Data From The ROM Assembly In The Transaxle

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

In the following procedure, the TCM reads data from the ROM assembly and writes it to the EEPROM in the TCM.

  1. Erase the EEPROM in the TCM.
  2. Move selector lever to "P" position.
  3. Turn ignition switch ON.
scientia non olet · About LEMON Manuals