LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1001 (Engine Mechanical) >> Service Data And Specifications (SDS) >> Cylinder Head >> Valve Dimensions

Valve Dimensions

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
VALVE DIMENSIONS

Unit: mm (in)
G04878532Courtesy of NISSAN MOTOR CO., U.S.A.
Valve head diameter "D" Intake 36.6 - 36.9 (1.441 - 1.453)
Exhaust 30.2 - 30.5 (1.189 - 1.201)
Valve length "L" Intake 97.13 (3.8240)
Exhaust 94.67 (3.7272)
Valve stem diameter "d" Intake 5.965 - 5.980 (0.2348 - 0.2354)
Exhaust 5.955 - 5.970 (0.2344 - 0.2350)
Valve seat angle "α" Intake 45°15' - 45°45'
Exhaust
Valve margin "T" Intake 1.15 - 1.45 (0.0453 - 0.0571)
Exhaust 1.45 - 1.75 (0.0571 - 0.0689)
Valve margin "T" limit More than 0.5 (0.020)
Valve stem end surface grinding limit Less than 0.2 (0.008)