LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1001 (Engine Mechanical) >> Service Data And Specifications (SDS) >> Camshaft >> Available Valve Lifter

Available Valve Lifter

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
VALVE LIFTER SPECIFICATION

Unit: mm (in)
Identification (stamped) mark Thickness
788C 7.88 (0.3102)
790C 7.90 (0.3110)
792C 7.92 (0.3118)
794C 7.94 (0.3126)
796C 7.96 (0.3134)
798C 7.98 (0.3142)
800C 8.00 (0.3150)
802C 8.02 (0.3157)
804C 8.04 (0.3165)
806C 8.06 (0.3173)
808C 8.08 (0.3181)
810C 8.10 (0.3189)
812C 8.12 (0.3197)
814C 8.14 (0.3205)
816C 8.16 (0.3213)
818C 8.18 (0.3220)
820C 8.20 (0.3228)
822C 8.22 (0.3236)
824C 8.24 (0.3244)
826C 8.26 (0.3252)
828C 8.28 (0.3260)
830C 8.30 (0.3268)
832C 8.32 (0.3276)
834C 8.34 (0.3283)
836C 8.36 (0.3291)
838C 8.38 (0.3299)
840C 8.40 (0.3307)
G04878530Courtesy of NISSAN MOTOR CO., U.S.A.