LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1001 (Engine Mechanical) >> On-Vehicle Repair >> Fuel Injector And Fuel Tube >> Inspection >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Check on Fuel Leakage

  1. Turn ignition switch "ON" (with the engine stopped). With fuel pressure applied to fuel piping, check there are no fuel leakage at connection points.
    NOTE: Use mirrors for checking at points out of clear sight.
  2. Start the engine. With engine speed increased, check again that there are no fuel leakage at connection points.
    CAUTION: Never touch the engine immediately after stopped, as the engine becomes extremely hot.
scientia non olet · About LEMON Manuals