Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Remove the map lamp assembly. Refer to "REMOVAL AND INSTALLATION ".
Detach the microphone connector (A).

Fig 1: Identifying Microphone Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove the map lamp covers (1), then remove the map lamp assembly cover (2).

Fig 2: Identifying Map Lamp Covers And Map Lamp Assembly Cover
Courtesy of NISSAN MOTOR CO., U.S.A.
Release the microphone tabs (A), then remove the microphone (1).

Fig 3: Identifying Microphone Tabs And Microphone

Courtesy of NISSAN MOTOR CO., U.S.A.