LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1000 (Audio, Visual, Navigation System) >> BOSE W/Monochrome Display >> On-Vehicle Repair >> Antenna Amp >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear pillar finisher RH. Refer to "EXPLODED VIEW ".
  2. Partially remove the side curtain air bag module RH to gain access to the antenna amp. Refer to "REMOVAL AND INSTALLATION ".
  3. Detach the antenna amp. harness clip (A), disconnect the antenna amp. connectors (B), remove the antenna amp. screw (C) and remove the antenna amp. (1).
Fig 1: Identifying Antenna Amp Harness Clip, Antenna Amp Connectors And Antenna Amp Screw
G05885911Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals