LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Front Brake Pads >> Installation

Front Brake Pads: Installation

  1. Attach the inner shim and shim cover to the inner pad and attach the outer shim to the outer pad. Apply grease to the contact surface of pad retainer with the pads, then attach the pad retainer, pads and pad return spring to the torque member.
  2. Install the cylinder body to the torque member. Insert a main pin bolt (on the lower side) and tighten it to specification. See TORQUE SPECIFICATIONS  . Check the brakes for drag.
scientia non olet · About LEMON Manuals