Light Warning Chime

With the key removed from the ignition switch, the driver door open, and the lighting switch in 1ST or 2ND position, the warning chime will sound. [Except when headlamp battery saver control operates (for 5 minutes after ignition switch is turned to OFF or ACC position) and headlamps do not illuminate.]

Signal is supplied

• From combination switch (lighting switch) terminals 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10
• To BCM terminals 40, 41, 42, 43, 47, 48, 49, 50, 51 and 52.

Ground is supplied

• To BCM terminal 14
• Through front door switch LH terminal 2
• Through front door switch LH case ground.

With these conditions, when power and ground are supplied, the light warning chime sounds.