LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Warning System - Warning Chime >> Warning Chime >> Light Warning Chime Does Not Operate

Light Warning Chime Does Not Operate

  1. CHECK WARNING CHIME OPERATION 

    Check key warning chime and seat belt warning chime functions.

    Do key warning chime and seat belt warning chime sound?

    1. YES: GO TO 2.
    2. NO: Go to ALL WARNINGS ARE NOT OPERATED  or KEY WARNING CHIME AND LIGHT WARNING CHIME DOES NOT OPERATE (SEAT BELT WARNING CHIME DOES OPERATE)  .
  2. DATA MONITOR INSPECTION 

    With "LIGHT WARN ALM on the data monitor, confirm "TAIL LAMP SW and "FR FOG SW turn ON/OFF when lighting switch and front fog switch are operated.

    Fig 1: Data Monitor Inspection Chart
    G02888890Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Scan Tool Display "Data Monitor
    G02888891Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG

    1. OK: Replace BCM.
    2. NG: GO TO 3.
  3. INSPECTION BETWEEN COMBINATION SWITCH AND BCM 

    Select BCM on CONSULT-II, and perform "BCM C/U self-diagnosis.

    Self-diagnostic results content

    No malfunction detected: Replace BCM.

    CAN communication or CAN communication system: Check BCM CAN communication system. Go to CAN COMMUNICATION .

    Diagnosis 1 - 5 systems open circuit: Malfunction in combination switch system. Go to COMBINATION SWITCH INSPECTION ACCORDING TO SELF - DIAGNOSTIC RESULTS .