LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Instrument Panel Assembly >> Cup Holder

Cup Holder

  1. Open storage bin B.
  2. Remove console finisher.
  3. Remove screw cover and remove screw using power tool.
    • Pull up to release clips on cup holder and remove cup holder.
  4. Installation is in the reverse order of removal.
    Fig 1: Removing Screw Cover
    G02888383Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals