Turn Signal Operation: Notes

When the ignition switch is in the ON or START position, power is supplied

• through 10A fuse [No. 12, located in the fuse block (J/B)]
• to BCM (body control module) terminal 35, and
• through 10A fuse [No. 14, located in the fuse block (J/B)]
• to terminals 17 and 18 of the combination meter.

Ground is supplied

• to BCM terminals 8, 27, and 63
• through body grounds F14 (QR25DE models), M57, M61, E15, and E24, and
• to combination meter terminals 6 and 39
• through body grounds F14 (QR25DE models), M57 and M61.