Low Beam

1. Turn headlamp low beam on.
2. Use adjusting screw to perform aiming adjustment.

Fig 1: Adjusting Vertical Aim Of Lamp

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Adjusting Beam Pattern

Courtesy of NISSAN MOTOR CO., U.S.A.

If he vehicle front body has been repaired and/or the headlamp assembly has been replaced, check aiming. Use the aiming chart shown in the figure.

• Basic illuminating area for adjustment should be within the range shown on the aiming chart. Adjust headlamps accordingly.