Low Beam Operation

When the lighting switch is turned to headlamp "ON" (2ND) position, "LOW BEAM" (B) position, power is supplied:

From lighting switch terminal 7
To RH headlamp terminal LO.
Ground is supplied:
To RH headlamp terminal E
Through body grounds E7 and E37.
Also, when the lighting switch is moved to headlamp "ON" (2ND) position, "LOW BEAM" (B) position, power is supplied:
From lighting switch terminal 10
To LH headlamp terminal LO.
Ground is supplied:
To LH headlamp terminal E
From daytime light control unit terminal 7
Through daytime light control unit terminal 9
Through body grounds E7 and E37.
With power and ground supplied, the low beam headlamps illuminate.