Removal and Installation: Removal

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Remove the undercover using power tool.
Drain the coolant from the radiator.
CAUTION: Perform when engine is cold.
Disconnect radiator upper and lower hoses.
Remove the A/T oil cooler hoses, if equipped.
- Plug hoses to avoid leakage of A/T fluid.
Disconnect the reservoir tank hose.
Remove the radiator mounting brackets.
Remove the radiator and radiator fan assembly.