LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 831 (Automatic Transmission) >> On Board Diagnostic System Description >> OBD-II Diagnostic Trouble Code (DTC) >> How To Erase DTC (No Tools)

How To Erase DTC (No Tools)

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the ignition switch stays "ON" after repair work, be sure to turn ignition switch "OFF" once. Wait at least 5 seconds and then turn it "ON" (engine stopped) again.
  2. Perform "TCM SELF-DIAGNOSTIC PROCEDURE (No Tools) ". (The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)
scientia non olet · About LEMON Manuals