With Consult-II

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch "ON".

Fig 1: CONSULT- II (Select System Display)
Courtesy of NISSAN MOTOR CO., U.S.A.
Select "DATA MONITOR" mode for "A/T" with CONSULT-II.

Fig 2: CONSULT- II (Select Diag Mode)
Courtesy of NISSAN MOTOR CO., U.S.A.
Wait at least 6 seconds or start engine and wait for at least 6 seconds.