LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 831 (Automatic Transmission) >> DTC Turbine Revolution Sensor >> Description >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> With CONSULT-II >> No Tools

No Tools

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine.
  2. Drive vehicle under the following conditions:

    Selector lever in "D", vehicle speed higher than 40 km/h (25 MPH), engine speed higher than 1, 500 rpm, throttle opening greater than 1/8 of the full throttle position and driving for more than 5 seconds.

    Fig 1: CONSULT-II (Select Diag Mode Display)
    G02033038Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Perform self-diagnosis.

    Refer to TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS) .

    Fig 2: DTC Blinking Pattern
    G02033039Courtesy of NISSAN MOTOR CO., U.S.A.