LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 831 (Automatic Transmission) >> DTC P0740: Torque Converter Clutch Solenoid Valve >> Description >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON".
    Fig 1: CONSULT - II (Select System Display)
    G02032925Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Select "DATA MONITOR" mode for "ENGINE" with CONSULT-II and wait at least 1 second.
    Fig 2: CONSULT-II (Select Diag Mode Display)
    G02032926Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Start engine and maintain the following conditions for at least 5 consecutive seconds.

    VHCL SPEED SE: 80 km/h (50 MPH) or more 

    THROTTLE POSI: 0.5/8 - 1.0/8 

    Selector lever: D position 

    Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving conditions required for this test.