High Beam Operation/Flash-to-pass Operation

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

When the lighting switch is turned to 2ND and HIGH ("A") or PASS ("C") positions, ground is supplied

to terminal 1 of headlamp LH
through daytime light control unit terminals 10 and 13, and
to combination meter terminal 27 for the HIGH BEAM indicator
through lighting switch terminals 6 and 5
through body grounds E13 and E41.
Ground is also supplied
to terminal 1 of headlamp RH
through daytime light control unit terminals 9 and 14
through lighting switch terminals 9 and 8
through body grounds E13 and E41.
With power and ground supplied, the high beam headlamps and HIGH BEAM indicator illuminate.