Removal and Installation: Removal

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

After removing moldings, remove glass using piano wire or power cutting tool and an inflatable pump bag.

WARNING: When cutting the glass from the vehicle, always wear safety glasses and heavy gloves to help prevent glass splinters from entering your eyes or cutting your hands.

CAUTION:

Be careful not to scratch the glass when removing.
Do not set or stand the glass on its edge. Small chips may develop into cracks.

Fig 1: Caution For Removing Glass Using Piano Wire
Courtesy of NISSAN MOTOR CO., U.S.A.