Height Difference Adjustment
WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Tilt glass lid up and down.
- Check height difference between roof panel and glass lid to see if it is as "A-A" as shown in Figure .
- If necessary, adjust it by using one of following procedures.
- Adjust by adding or removing adjustment shim(s) between glass lid and link assembly.
- If glass lid protrudes above roof panel, add shim(s) or plain washer(s) at sunroof mounting bracket or stud bolt locations to adjust sunroof installation as required.