LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 809 (Engine Mechanical) >> Cylinder Head >> Inspection >> Valve Lifter

Valve Lifter

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check contact and sliding surfaces for wear or scratches.
    Fig 1: Checking Contact And Sliding Surfaces Of Valve Lifter
    G02032271Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Check diameter of valve lifter and valve lifter guide bore.

    Valve lifter outer diameter: 

    33.977 - 33.987 mm (1.3377 - 1.3381 in) 

    Fig 2: Checking Diameter Of Valve Lifter
    G02032272Courtesy of NISSAN MOTOR CO., U.S.A.

    Lifter guide bore diameter: 

    34.000 - 34.016 mm (1.3386 - 1.3392 in) 

    Fig 3: Checking Valve Lifter Guide Bore
    G02032273Courtesy of NISSAN MOTOR CO., U.S.A.