LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 809 (Engine Mechanical) >> Cylinder Head >> Inspection >> Camshaft Cam Height

Camshaft Cam Height

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure camshaft cam height.

    Standard cam height: 

    Intake and exhaust 

    44.465 - 44.655 mm (1.7506 - 1.7581 in) 

    Cam wear limit: 

    0.2 mm (0.008 in) 

  2. If wear is beyond the limit, replace camshaft.
    Fig 1: Measuring Camshaft Cam Height
    G02032253Courtesy of NISSAN MOTOR CO., U.S.A.