LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 807 (Manual Air Conditioner) >> Blower Fan Resister >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect blower motor resistor connector.
  2. Remove blower motor resistor screws and then remove it.
    Fig 1: Removing Blower Motor Resistor Screws
    G02162731Courtesy of NISSAN MOTOR CO., U.S.A.