LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 798 (Automatic Air Conditioner) >> Fan Control Amplifier >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect fan control amp. connector
  2. Remove screws from the fan control amp. and then remove fan control amp.
    Fig 1: Locating Fan Control Amp. Screws
    G02162550Courtesy of NISSAN MOTOR CO., U.S.A.