LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 796 (Instrument Panel) >> Instrument Panel Assembly >> Removal and Installation >> Removal And Installation >> M/T Finisher

M/T Finisher

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove shifter knob.
  2. Pull up to release clips.
    Fig 1: Removing M/T Finisher
    G02162287Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals