LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 794 (Sun Roof) >> Sunroof >> Fitting Adjustment >> Gap Adjustment (B-B)

Gap Adjustment (B-B)

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove headlining. Refer to "HEADLINGS ".
  2. Loosen sunroof assembly front end, side rail, and front and rear bracket attaching bolts.
  3. Carefully slide sunroof assembly side to side until gap is within specifications, and snug securing bolts.
  4. Tilt glass lid up and down several times using sunroof switch to ensure smooth operation.
  5. Tighten sunroof assembly front end, side rail, and front and rear bracket attaching bolts.
    1. Sunroof assembly mounting bolts 
    2. Sunroof assembly front end bolts :5.1 - 6.47 N-m (0.52 - 0.66 kg-m, 46 - 57 in - lb) 
    3. Sunroof assembly side rail bolts :5.1 - 6.47 N-m (0.52 - 0.66 kg-m, 46 - 57 in-lb) 
    4. Sunroof assembly front bracket bolts :5.1 - 6.47 N-m (0.52 - 0.66 kg-m, 46 - 57 in-lb) 
    5. Sunroof assembly rear bracket bolts :5.1 - 6.47 N-m (0.52 - 0.66 kg-m, 46 - 57 in-lb) 
scientia non olet · About LEMON Manuals