Gap Adjustment (A-A, C-C)
WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
- Open sunshade assembly.
- Tilt glass lid up then remove side trim.
- Loosen glass lid securing bolts, then tilt glass lid down.
- Manually adjust glass lid from outside of vehicle so gap is within specifications, and snug securing bolts.
- Tilt glass lid up and down several times using sunroof switch to ensure smooth operation.
- Tilt glass lid up and tighten bolts.
NOTE:
First tighten left front bolt, then tighten right rear bolt on glass lid to prevent lid from moving while tightening other bolts.
- Glass lid assembly mounting bolts : 3.0 - 5.0 N-m (0.3 - 0.5 kg-m, 26 - 43 in-lb)