LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 783 (Clutch) >> Clutch Master Cylinder >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the brake fluid from the clutch hydraulic system.
    CAUTION: Do not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with water immediately.
  2. Remove clutch tube using a flare nut wrench.
  3. Remove snap pin between clutch pedal and push rod, and remove clevis pin.
  4. Remove the clutch master cylinder mounting nuts and reservoir tank bracket mounting nuts and bolts to remove the clutch master cylinder.
scientia non olet · About LEMON Manuals