LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 777 (Automatic Transaxle Re4F03B) >> On Board Diagnostic System Description >> OBD-II Diagnostic Trouble Code (DTC) >> How To Erase DTC (With GST)

How To Erase DTC (With GST)

WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 5 seconds and then turn it ON (engine stopped) again.
  2. Perform OBD-II Self-diagnostic Procedure (No Tools). Refer to OBD-II SELF-DIAGNOSTIC PROCEDURE (NO TOOLS) . (The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)
  3. Select Mode 4 with Generic Scan Tool (GST). For details, Refer to CLEARING DIAGNOSTIC TROUBLE CODES .
scientia non olet · About LEMON Manuals