LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 777 (Automatic Transaxle Re4F03B) >> On Board Diagnostic System Description >> OBD-II Diagnostic Trouble Code (DTC) >> How To Erase DTC (No Tools)

How To Erase DTC (No Tools)

WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 5 seconds and then turn it ON (engine stopped) again.
  2. Perform TCM Self-diagnostic Procedure (No Tools). Refer to TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS) . (The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)
scientia non olet · About LEMON Manuals