LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 776 (Manual Transaxle RS6F51H) >> Reverse Idler Shaft And Gears >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove reverse idler gear adjusting shim.
  2. Remove reverse idler gear (rear), reverse coupling sleeve and insert spring simultaneously.
  3. Remove reverse idler gear needle bearing.
  4. Remove thrust needle bearing.
  5. Remove reverse baulk ring.
  6. Remove reverse idler gear (front).
  7. Remove reverse idler gear needle bearing.
  8. Remove thrust needle bearing.
  9. Pull off locking pin from reverse idler shaft.
scientia non olet · About LEMON Manuals