M/T Oil: Replacement: Filling
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Remove filler plug. Fill with new oil until oil level reaches the specified limit near filler plug mounting hole.
- Oil grade : API GL-4
- Capacity (reference) : Approximately 2.3 L, (2 3/8 qt) .
- After refilling oil, check oil level. Assemble gasket on to filler plug, then install it on the transaxle body.
- Filler plug: 30 - 39 N.m (3.1 - 4.0 kg-m, 23 - 28 ft-lb)
CAUTION:
Do not reuse gasket.