M/T Oil: Replacement: Draining
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Start the engine and let it run to warm up the transaxle.
- Stop the engine. Remove drain plug and drain oil.
- Set a gasket on the drain plug and install it on the transaxle.
- Drain plug : 30 - 39 N.m (3.1 - 4.0 kg-m, 23 - 28 ft-lb)
CAUTION:
Do not reuse gasket.