M/T Oil: Replacement: Filling
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Remove filler plug. Fill with new oil until oil level reaches the specified limit near filler plug mounting hole.
- Oil grade: API GL-4
- Capacity (reference): Approximately 3.0L (3 1/8 qt)
- After refilling oil, check oil level. Assemble gasket on to filler plug, then install it on the transaxle body.
- Filler plug: 10 - 19 N.m (1.0 - 2.0 kg-m, 87 - 173 in-lb)
CAUTION:
Do not reuse gasket.