Section 773 (Clutch System QG18DE): Piping: Removal
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Remove air cleaner and air duct.
- Drain brake fluid from clutch system.
- Remove flare nut from cylinder body using a flare nut wrench.
- Remove clutch hose from operating cylinder.
- Remove clutch hose and clutch tube from bracket by removing lock plate.
CAUTION:
Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with water immediately.